Kuhn 4835 -730F

Value a Trade Get Financed

Overview

Retain Residue, Remove Compaction

The 4835 in-line ripper provides efficient compaction removal, while allowing crop residue to remain virtually undisturbed on the surface. Working widths ranging from 24’ to 27’6”, and a variety of shank and point options are available to meet your agronomic needs.

The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in rigid 4- to 7-shank models or folding 7- to 11-shank models with choice of 30”, 36”, 38” or 40” shank spacing dependent upon model. The 4835 can be equipped with spring reset, Pathfind’r™ or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of shanks and points are available depending on your agronomic needs.

Specifications

Model

4835 In-Line Ripper

Category Name

Agriculture

Sale Type

New

Manufacturer

Kuhn

Quantity

0

Manufacturer Qty

0

Model

4835 -730F

Frame Type

NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar

Shank Spacing

30" (76.2 cm)

Working Width

17'6" (5.3 m)

Transport Width

12'6" (3.8 m)

Number Of Shanks

7

Shear-Bolt Shank Weight

5,900 lb (2 676 kg)

Spring Reset Shank Weight

7,300 lb (3 311 kg)

models

	4835-730F	4835-730R	4835-830F	4835-836F	4835-838F	4835-840F	4835-930F
Transport Width	12'6" (3.8 m)	16'10" (5.1 m)	12'4" (3.8 m)	14'5" (4.4 m)	14'5" (4.4 m)	14'5" (4.4 m)	14'5" (4.4 m)
Frame Type	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar	NEW Heavy-Duty Toolbar 6" x 6" Double Rank Toolbar
Number of Shanks	7	7	8	8	8	8	9
Shank Spacing	30" (76.2 cm)	30" (76.2 cm)	30" (76.2 cm)	36" (91.4 cm)	38" (96.5 cm)	40" (101.6 cm)	30" (76.2 cm)
Working Width	17'6" (5.3 m)	17'6" (5.3 m)	20' (6.1 m)	24' (7.3 m)	25'4" (7.7 m)	26'8" (8.1 m)	22'6" (6.8 m)
Spring Reset Shank Weight	7,300 lb (3 311 kg)	6,882 lb (3 121 kg)	7,800 lb (3 538 kg)	8,464 lb (3 839 kg)	8,464 lb (3 839 kg)	8,464 lb (3 839 kg)	8,813lb (3 998 kg)
Shear-Bolt Shank Weight	5,900 lb (2 676 kg)	5,482 lb (2 487 kg)	6,200 lb (2 812 kg)	6,851 lb (3 108 kg)	6,851 lb (3 108 kg)	6,851 lb (3 108kg)	6,993 lb (3 172 kg)

your benefits

3-Point or Pull-Type Configurations

Kuhn 4835 730F 3-Point Hitch

Designed for deep tillage with strength and durability in mind. Category 3, 3N, 4 & 4N 3-point hitch configurations are available dependent on machine configuration. 3-point hitches are integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.

Kuhn 4835 730F Rear Lift Drawbar Pull-Hitch

Rear lift pull-hitch option available for all 4835-530F through 4835-1130F models for transport stability. The drawbar pull-hitch includes 280/70 R15 tires on the rear lift and 280/70 R15 front mounted gauge wheel tires.

Shank Mounts to Match Your Field Conditions

Kuhn 4835 730F Shear-Bolt

Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern. Shear-bolt protection guards against shank damage from unexpected obstacles.

// Shear force: 10,000 pounds (approximate)

// 16” maximum shank working depth

// For non-rock conditions

Kuhn 4835 730F Spring Reset

Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.

// 2,500 pound point load

// 20” trip height

// 16” maximum shank working depth

// 36” underframe clearance

Kuhn 4835 730F PathFind’R™

Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.

// Basic spring reset design

// Makes deep ripping possible on contours or terraces

// Deflects impacts improving performance in rocky soils

// Smoother steering under full power with tracked tractors

// Reduces stress on implement frame and 3-point tractor hitch

// Not compatible with pull-type hitch

// 20” trip height

// 16” maximum shank working depth

// 36” underframe clearance

Shank & Point Options

Kuhn 4835 730F A Variety of Options

The 4835 in-line ripper may be configured in many different ways to achieve your agronomic goals. Choose from a variety of shank, point and wing combinations to achieve your desired field finish. Surface field finish is primarily determined by the type of shank used with parabolic offering the most soil disturbance, followed by MRD and no-till. Compaction removal, residue incorporation and draft are determined by points and shank caps.

Kuhn 4835 730F No-Till Shanks & Points"

// Choice of ¾" no-till shank (normal conditions) or 1” no-till shank (extreme conditions)

// Austempered wear bar

// Choose from 1-3/4" or Double K® chromium carbide points with either 8” wing or low disturbance shank cap

Pictured: ¾” no-till shank with Double K chromium carbide point and low disturbance shank cap (left), 1” no-till shank with 1-3/4” point and 8” wing (right)

Kuhn 4835 730F Conservation Tillage Shanks & Points"