New Holland Haytools & Spreaders

New Holland MegaCutter™ Triple Disc Mowers and Mower-Conditioners - MegaCutter™ 533 Rear Mounted Disc Mower-Conditioner

Value a Trade Get Financed

Overview

NUMBER OF DISCS

18 (2 X 9)

MINIMUM PTO POWER REQUIRED (HP (KW))

235 (175)

UP TO 50 ACRES PER HOUR

The importance of effective and efficient conditioning is clear. MegaCutter™ mounted disc mowers and disc mower-conditioners match capacity to your imagination.

THE COMBINATION THAT’S RIGHT FOR YOU

New Holland offers triple-swath productivity both with conditioning and without to fit your crops, your tractor horsepower and your budget.

DURABILITY TO HANDLE TOUGH CONDITIONS

Every part of the MegaCutter™ system is ruggedly built for high-speed mowing. Keeping knives sharp is easy with the standard quick-change knife system.

ROLL OR FLAIL CONDITIONING

If your crops require conditioning, MegaCutter™ disc mower-conditioners offer you the choice of gentle rubber chevron intermeshing rolls perfect for legume crops or steel V-tine flail conditioning for grass hay.

Specifications

Model

MegaCutter™ Triple Disc Mowers and Mower-Conditioners

Category Name

Equipment

Sale Type

New

Manufacturer

New Holland

Quantity

0

Manufacturer Qty

0

megacutter™ disc cutterbar

STANDARD QUICK-CHANGE KNIFE SYSTEM KEEPS YOU CUTTING SHARP Sharp knives give you the clean cut you want with less crop left behind. As a result, you harvest more tons, get fast regrowth and assure your forage quality for the next cutting. Keeping knives sharp is easy with the standard quick-change knife system. It allows you to change damaged knives fast or flip an entire set and get back to mowing pronto to keep on your mowing schedule.
CLEAN CUTTING AND RELIABILITY ARE STANDARD ON EVERY MODEL Whether you’re cutting your own fields or working as a contractor, clean cutting without slowdown is what you expect. The MegaCutter™ disc cutterbar provides a clean cut with minimal tilt, even in thick and tangled crops. The round disc profile is less susceptible to impacts than other disc shapes and each disc drive is fitted with a drive protection system.
RESPONSIVE SUSPENSION TO ADAPT TO CHALLENGING TERRAIN The MegaCutter 510 and 512 front-mounted models offer a broad suspension range, with up, back and angular motion to react to changing terrain and protect both machine and crop stubble.
PROTECTION, SPEED AND EFFICIENCY The MegaCutter 531 rear plain disc mower is equipped with a non-stop breakaway and automatic reset to protect the cutting heads. Each pendulum-arm-mounted head automatically swings up and back and then returns to the working position to maintain your pace.
ADVANCED 3D SUSPENSION The MegaCutter 533 rear disc mower-conditioner is fitted with an advanced three-dimensional suspension that assures clean cutting, machine protection, and high working speeds. Unlike the pendulum design, quad-link arms attach each head to the main frame so they are free to move independently up and back.

conditioning systems

STEEL FLAIL TINE CONDITIONING Steel flail tines are positioned at an angle to the rotor’s center, providing increased outward crop pressure against the adjustable conditioning hood and improving swath and windrow formation. You can adjust the hood to change the conditioning intensity. The semi-swinging flail tines allow obstructions to pass, for better protection compared to fixed poly or steel tines. And unlike conventional, free-swinging tines, they cannot swing back over center, but are held in the ideal place by centrifugal force for efficient and effective conditioning and uniform swath and windrow formation.
RUBBER CHEVRON INTERMESHING ROLLS Rubber chevron intermeshing rolls provide full-stem crimping and cracking with a scrubbing action while handling the leaves of high-value feeds delicately, making it the ultimate solution for alfalfa and clover. You get gentle handling while making fast-drying swaths.
HIGHER RETAINED QUALITY THROUGH FAST DRYDOWN Faster hay drying not only means beating the weather, it allows you to get crop out of the field with maximum feed quality. New Holland offers three effective solutions for fast drying of high-quality feed, including gentle rubber chevron intermeshing rolls for alfalfa and other legume crops, flail tine conditioning for grass hay, and a lower-horsepower model with no conditioning that’s ideal for silage making.

technical specifications

Mounting	Rear-three point linkage
Attachment	Standard ASABE link ends Cat III / Cat IV
Cutting width narrow setting (ft. in. (m))	30' 8" (9.32)
Cutting width wide setting (ft. in. (m))	33' 6" (10.2)
Cutting width adjustment	Hydraulic adjustment 6 in. (152 mm) to 11 in. (279 mm) overlap
Cutting height control	Tractor rear top link adjustment
Type	Low profile spur gear
Number of discs	18 (2 x 9)
Knives per disc	2
Quick change knife system	Standard
Disc speed @ 1000 rpm PTO speed (rpm)	3,000
Cutter bar protection system	Shear hub system - Standard
Flotation	Up & back, hydropneumatic, adjustment on-the-go from monitor
Cutting height (in. (mm))	2-4 (50-100)
Type	Chevron intermeshing rubber
Drive method	Enclosed gearbox
Speed (rpm)	900
Conditioner roll tension adjustment	Tension spring
Conditioner adjustment	Adjustable tension / gap stop
Type	Tangential mounted steel v-tines
Drive method	Belt driven
Speed (rpm)	700
Conditioner gap adjustment	Adjustable hood
Minimum PTO power required (hp (kW))	235 (175)
Hydraulic circuits required	CCLS 1 LS - Power Beyond, 6.5-13.25 gpm (24.6-50.2 Lpm) 2175-2900 psi (150-200 bar)
Electrical	7-pin electrical connector for transport lights
User interface / machine control	Virtual Terminal Monitor with ISOBUS 11783 connector
Hydraulic folding cutter bar end guards	Standard
Width-transport (ft. in. (m))	9' 4" (2.84)
Height-transport (ft. in. (m))	13' 6" (4.12)
Height-vertically parked storage position (ft. in. (m))	13' 1" (3.9)
Operating weight (lbs. (kg))	6756 (3064) - Flail tine version, 7030 (3188) - Roll version