Efficient and Durable Design

Efficient Twin-Conception de tarière

The BTC delivery box uses a simple, twin-auger design for consistent feed flow to the discharge, for fast, even feed placement across the entire length of the bunk.

The raised right auger keeps the lower left auger charged with feed to provide even material flow to the discharge. The raised right auger also helps with load leveling during feed delivery. The left discharge auger moves material forward to the discharge for a consistent feed placement in front of your animals.

The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout. The auger design also eliminates material carryaround versus a chain and apron floor design.

Reliable and Long Lasting

The simple auger design eliminates the need for extra maintenance items that are necessary on an apron floor design such as retensioning, or replacing worn out chains, for a reliable, long-lasting machine. The auger design also eliminates material carryaround versus a chain and apron floor design.

Solid Undercarriage

The BTC delivery boxes feature the proven bogie axle design that provides reliable service and a solid foundation to carry the box. Single and tandem axle options, as well as multiple tire options, allow you to tailor the machine to fit your specific needs.

Ration Versatility

KUHN Knight BTC delivery boxes will deliver a wide range of ingredients including starter, finish and dairy rations faster and more efficiently than any other delivery boxes on the market.

Easy Access Door

Le seul-handled latch provides easy access to the oil bath. An improved seal keeps oil in, and dirt and debris out, to help minimize wear on drive components and maintain a cleaner appearance.

Truck Drive Options

Pour camion-mounted models, choose between a mechanical and a hydrostatic drive to match your operation's needs.

Entraînement mécanique
Due to the low horsepower requirement of the BTC design, a mechanical drive, powered by a transmission PTO, works well in many situations, at a lower cost than alternative drive options. Mechanical drives are available in a number of different configurations, including front and mid-unit gearbox mounting in order to match up to nearly any truck chassis. Mechanical drives are controlled with an in-cab control box.

Entraînement hydrostatique
Hydrostatic drive systems are driven off of either a front engine (FEPTO) or rear engine (REPTO) power take-off. Driven off of the engine instead of transmission, hydrostatic drives allow for the mixer speed to be controlled independent of ground speed. The hydrostatic drives also allow for gentler startup, which is important in larger units delivering heavier loads.

Personnalisez votre machine

Remorque & Modèles de camions

To suit your operation's needs, KUHN Knight BTC 100 Series delivery boxes are available in a trailer or truck-configuration montée.

Les modèles de remorques sont les plus populaires car ils sont les plus économiques et les plus polyvalents. Le fait qu'ils soient amovibles permet d'utiliser le tracteur ailleurs dans la ferme lorsqu'il n'est pas utilisé pour l'alimentation.

Camion-Les modèles montés sont une option adaptée pour ceux qui doivent nourrir les vaches à plusieurs endroits différents, avec de grandes distances à parcourir. Cette option permet à un distributeur d'aliments de passer rapidement du lieu de mélange à la mangeoire et vice-versa.

Plusieurs options de décharge

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor, 3-auger discharge or a 4-auger discharge to be equipped on your BTC delivery box.

Plateau coulissant
Le plateau coulissant à déchargement latéral est doté de commandes hydrauliques simples et permet de guider l'alimentation plus loin de la trajectoire des pneus. Les aimants sont fournis de série sur le plateau coulissant.

Convoyeur à chaîne et à lattes
Les options de convoyeurs à chaîne et à lattes robustes offrent une durabilité et une durée de vie optimales.-Les composants robustes garantissent un service fiable et les multiples options de longueur de convoyeur offrent une flexibilité inégalée pour s'adapter à différentes situations d'alimentation.

3-Décharge par vis sans fin
le 3-La décharge par vis sans fin permet un réglage pour l'alimentation dans des trémies plus hautes. Elle est dotée d'un entraînement hydraulique simple qui assure une décharge régulière et en douceur. Les revêtements de goulotte en poly durables aident à prévenir la rouille et à limiter l'usure. 3-la décharge par vis sans fin est livrée en standard avec une pointe fixe-désactivé et construit-dans les aimants.

4-Décharge par vis sans fin
Centre-rotating augers bring the feed to the center of the discharge to increase overall capacity and provide a smooth, even discharge for all ration types. The 4-auger discharge comes standard with power tip-désactivé et construit-in magnets. The discharge augers are simple to remove for easy service. Long-lasting, replaceable polyethylene chute liners prevent rust and limit wear.

As with the main auger drive, the discharge auger shafts are splined for a more positive power transfer and longer service life. The simplified drive design, featuring only two chains and a remote grease bank, results in in easy service and maintenance.