LARGEUR DE COUPE (FT. IN. (MM)) 7' 11" (2413) NOMBRE DE DISQUES 6 | |
COUPE RAPIDE ET ABORDABLEThe HM Series offers smooth, fast, and reliable disc cutting at an economical price. | |
OPÉRATION FACILEUn seul-acting hydraulic cylinder makes it easy to lift the cutterbar at the end of each pass. A transport lock makes it easy to move from field to field. | |
BARRE DE COUPE ÉPROUVÉEDepending on the model, four, five or six low-profile, oval cutting discs use two knives per disc to slice through crop. Knives, made of high-quality steel, are reversible for twice the cutting life. | |
PROTÉGER VOTRE INVESTISSEMENTRock guards and skid shoes protect the discs and carry the cutterbar, while a spring-loaded breakaway latch protects it by allowing the mower to pivot back if an obstacle is encountered. |
CLEAN, HIGH SPEED CUTTINGSlice through thick crops, even gopher mounds, at high speed with the HM Series disc mowers. Depending on the model, four, five or six low-profile, oval cutting discs use two knives per disc to slice through the wet grasses. Knives, made of high-quality steel, are reversible for twice the cutting life. | |
ENCLOSED GEAR-DRIVEN CUTTERBARThe enclosed gear-driven cutterbar provides years of reliable service. Discs are retained with six bolts for easier service. | |
PROTECTION CONTRE LES DOMMAGES SUR LE TERRAINPlusieurs caractéristiques importantes de la série HM repoussent les objets étrangers et vous permettent de vous déplacer sur le terrain: | |
L'EMBRAYAGE À DÉPASSEMENT EST STANDARDle 540-rpm PTO driveline with overrunning clutch protects the driveline and makes hook-up easy. |
OPÉRATION FACILEThe simple design of HM Series disc mowers make them easy to use. A single-acting hydraulic cylinder makes it easy to lift the cutterbar at the end of each pass. Right-side swath divider wheel separates each cut path. | |
DES TRANSPORTS SIMPLESUn verrou de transport facilite le déplacement d'un champ à l'autre. | |
BRANCHEMENT FACILELes trois-indiquer-hitch mounting, two adjustable parking stands and a storage support for the PTO shaft make it easy to attach and remove HM Series mowers. |
Largeur de coupe (ft. in. (mm)) |
7' 11" (2413) |
Hauteur de coupe (in. (mm)) |
0.63-2.36 (16-60) |
Angle d'inclinaison de la barre de coupe (degrés) |
2 to -8 |
Plage de fonctionnement de la barre de coupe (degrés) |
+18 to -30 |
Angle de rupture (degrés) |
21 |
Type de barre de coupe |
Entraînement par engrenage fermé |
Nombre de disques |
6 |
Couteaux par disque |
2 |
Diamètre de coupe du disque (in. (mm)) |
20.47 (520) |
Lecteur de disque |
Entraînement par engrenage droit dans le carter commun |
Vitesse du disque (tr/min) |
3,154 |
Protection de l'engrenage de la barre de coupe |
No |
Swath width, approx standard** (in. (mm)) |
79 (2007), comprend une roue à andain droite standard |
Largeur d'andain avec roue d'andain en option** (in. (m)) |
67 (1702) avec roue à andain gauche |
Puissance minimale à la prise de force requise (hp (kW)) |
50 (37.3) |
Vitesse d'entrée (tr/min) |
540 |
Cannelure de l'arbre de prise de force / taille requise (in. (mm)) |
6-cannelure / 1.625 (41.3) |
Protection de transmission |
Entraînement par courroie à la barre de coupe |
Embrayage à roue libre |
Standard |
Tension de la courroie |
Pêne réglable |
Circuits hydrauliques nécessaires |
Une télécommande |
Pression de décharge minimale requise (psi (bar)) |
2,320 (160) |
Attelage |
Catégorie II |
Largeur hors tout (in. (mm)) |
178.35 (4530) |
Longueur totale (in. (mm)) |
54.33 (1380) |
Hauteur - transport position* (in. (mm)) |
122.44 (3110) |
Weight, shipping (Kg. (kg)) |
1215 (551) |
Weight, operating (Kg. (kg)) |
1077 (489) |
Vitesse de transport maximale |
N/A |
Pneus/roues |
N/A |
Nom | Lien |
Lourd-Faucheuses à disques pour travaux publics - Brochure | Télécharger |
Spécifications techniques | Télécharger |