Schultex

Schulte FLX-1510 Bras flexible

ID # 18577785
Arrière ID:18577785
Réserver une démo
Obtenir des directions Obtenir des directions
Imprimer
Partager

Valoriser une transaction Financement

Aperçu

Augmentez la sécurité, le confort et les performances de l'opérateur avec le révolutionnaire Schulte Flex-Bras.
The Schulte Flex-Le bras permet à l'opérateur de se déplacer sur la route tandis que le Schulte 10’ or 15’ rotary cutter cuts the ditch slope.
The tractor does not have to ride on the ditch slope so rollovers are very low risk. As an added bonus, wear & la déchirure du tracteur est considérablement réduite.
Operator comfort is greatly increased. Operators who have had a chance to use the Schulte FLEX-ARM say comfort & la sécurité sont les meilleures caractéristiques.
Visibility is improved. The operator is placed in a better position to view obstacles before they reach the rotary cutter.
The FLEX-ARM and Schulte cutter can be used in wet conditions, which could make cutting more difficult if the tractor had to ride on the slope.
Because of the unique way in which the FLEX-ARM is attached to the rotary cutter, it can be easily backed up to cut around approaches and other obstacles.

Spécifications

New heavy duty 11L x 15, 12 ply tires with a load capacity of 4000 Kg.
Cut directly in-line with the tractor or at any offset distance up to 122” (10.16ft)
Grande 2-1/2” arbre de pivot de roulette
6000 Capacité en livres 6 moyeux à boulons
Douilles de tension en acier à ressort et axes trempés par induction aux principaux points de pivot
Minimum of 3 hydraulic circuits required to operate the FLEX ARM with a 15’ or 10’ tondeuse
If independent wing lift is required on 15’ mower then 4 hydraulic circuits or optional _selector valve kit is required
à toute épreuve 3-1/2 X 36 welded hydraulic cylinder
Weight of the FLX-1510 is 2557 Kg
Kit d'éclairage de sécurité
Verrouiller-in replaceable axles
Se détache facilement du coupeur rotatif en déconnectant l'attelage et la jambe de force stabilisatrice
Continuous power rating of 200HP at 1000 RPM
Peut accueillir 540 or 1000 RPM power delivery from the tractor
Optionnel 6 port selector valve kit for independent wing action or limited tractor hyd. outlets
Largeurs de transport:
- Bras & couteau rotatif. 70” to the left of the tractor and 52” to the right for a total of 121”
- Bras seul. 70” to the left of the tractor and 47” to the right for a total of 117”
- Bras & coupeuse rotative avec bloc d'arrêt installé sur la barre de verrouillage de transport. 55” to the left of the tractor and 66” to the right. In this configuration the arm is 19” off center. The stop block can be installed when working on narrow roads to improve clearance for oncoming traffic.