Name: Kverneland 5090 MT BX
Brand: Kverneland
Availability: OutOfStock

Overview

The flexible butterfly combination with swath belt and steel tine conditioning.

Working width of 9.00m.

Flexible Butterfly Combination

Kverneland offers a top-of-the-line butterfly mower conditioner combination with a 9.00m working width and swath belt. It consists of a 3632 FT or 3636 FT front mounted mower conditioner with 3.16 or 3.60m working width and two rear-mounted 3.16m mower conditioner units.

The Advantages

9.00m working width.
Swath belt.
4 different output, 3 single swaths, 100% wide spreading, 3 swaths into 1 or two by two.
Pendulum suspension with 4 heavy duty springs.
Available with swath belt and FlipOver wide spreading.
ISOBUS control with intuitive joystick control.

Specifications

Model

5090 MT BX

Category Name

Agriculture

Sale Type

New

Manufacturer

Kverneland

Quantity

0

Manufacturer Qty

0

Gallery

technical specifications

	Working Width	Number of Discs	Conditioner	Power Requirements
5090 MT BX	9.00m	24 (8x3)	SemiSwing Steel Tines	160/220 kW/hp

features

4 Different Output

Kverneland 5090 MT is the most flexible mower conditioner solution on the market. It can be equipped with wide spreading equipment and the Kverneland BX Auto-Swather solution to ensure outstanding flexibility. It is easy to change between the different configurations, and conversion is very quick.

Kverneland 5090 MT can be set for 3 single swaths, wide spreading or three swaths into one with the Kverneland BX-Belt. An extra feature is the fact that the right belt can run in two directions, meaning that the Kverneland 5090 MT will place grass from 6 m into one swath.

Suited For All Conditions

The BX-Belt is capable of placing crop from either 6 or 9m into a single swath. The right hand belt can run both left and right, giving the option of placing three swaths into one, or in a two by two formation.

Pendulum Suspension

The 5090 MT and 5090 MT BX are fitted with a balancing weight arm, linked to the 4 heavy duty ground pressure springs on top of the three point suspension, to ensure an even weight distribution of the two rear sections.
The low gravity scale arm suspension ensures that the mowing units always remain horizontal in relation to the ground, when working in uneven or hilly conditions, or if the tractor is hitting small obstacles in the field.
When using SideShift equipment, the balancing arm also facilitates equal ground pressure on either side of the rear mower units.

5090 BX-Belt

Kverneland 5090 MT can be set for 3 single swaths, wide spreading or three swaths into one with the Kverneland BX-Belt.
An extra feature is the fact that the right belt can run in two directions, meaning that the Kverneland 5090 MT will place grass from 6 m into one swath.
When not in use the optional Kverneland BX-belt is raised hydraulically to a position above the mowing units. All you need to do is to push the button on the control box to change the configurations.
The Kverneland BX-Belts are floating on two large springs, and thus performing a unique and even swath formation under all conditions (no jumping up and down of belt units). A unique and simple solution with several advantages.
Fewer moveable parts, ensuring less wear and maintenance.
Better flotation of the entire machine.
Even swath formation under all conditions.

FlipOver Wide Spreading

As an option the Kverneland mower conditioners can be equipped with widespreading equipment. In this way, crop can be cut and spread in one operation, saving both time and at least one tedder operation.
The spreading vanes of the Kverneland FlipOver system are placed further back on the mowing unit than with conventional systems.
This is thanks to the spreading plate positioned far to the rear when in use. The improved distance between the conditioning rotor and the spreading vanes gives a more even spreading across the entire working width. A more even spreading ensures a better wilting.

SemiSwing conditioning

The SemiSwing conditioner system combines the aggressive conditioning seen from fixed fingers with the excellent tine protection typically associated with free swinging tines.
During normal operation the tines are fixed for effective conditioning, but if a SemiSwing tine comes into contact with an obstacle, force will exceed 22kg (48.5lbs) and it will spring back and leave a generous space for the obstacles up to 103mm to pass.
The complete conditioner tine has been redesigned to move the centre of gravity. The result is that the tine will stay in position when hitting the crop, to give full conditioner effect and to minimise wear and tear on the turning points.
The angle and position of the SemiSwing tines give a better crop transport. The crop is moved away from the conditioner rotor, resulting in reduced risk of blockages and full effect of the conditioner plate.

ISOBUS

When deciding what equipment to purchase, it is not always easy to find the optimal solution in the broad market offering of today. Technology is developing fast and tractors and implements are more and more equipped with high tech electronics. We understand this complexity and are committed to provide you with easy farming solutions. Therefore these cost-efficient ISOBUS Universal Terminals, IsoMatch Tellus PRO and IsoMatch Tellus GO+ are made for easy machine control and efficient farming.

IsoMatch Tellus PRO

With its advanced hardware and software features, the IsoMatch Tellus PRO provides the optimal precision farming solution for an all-in-one control system inside your tractor cab.

IsoMatch Tellus PRO is the centre for connecting all ISOBUS machines and a platform for running precision farming applications. It offers everything a farmer needs to get the maximum out of his machines and crops, as well as cost savings in fertiliser, chemicals and seeds by using automatic section control and variable rate control. With the unique dual screen functionality it gives the farmer the opportunity to view and control two machines and processes simultaneously.

Cutterbar with Round Discs

Kverneland uses round discs. Round discs are less susceptible to stone impact, and reduce shock loads in the transmission.
Stones are expelled immediately, before they have any chance of becoming jammed. The benefits are lower repair and maintenance costs - at the same time as a clean and aggressive cut.
The cutterbar has a high oil capacity, ensuring a very low working temperature. This ensures an efficient oil cooling and lubrication of the entire cutterbar.
The long curved gear wheels running in oil provides a very quiet and reliable power transmission.
The fully welded cutterbar gives a very stiff and strong design for high durability.
With the ProFit quick knife change system, maintenance of the cutting ability is easy. The knives are changed by one simple operation using the special lever.