New Holland BigBaler High Density Large Square Balers BigBaler 340 High Density

Overview

WIDTH (IN. (CM))

47 (120)

HEIGHT (IN. (CM))

35 (90)

HIGH-DENSITY PERFORMANCE

BigBaler 340 High Density balers can deliver up to 22% higher-density bales than other conventional large square balers, and up to 15% more when compared to BigBaler 340 PLUS models.

SMOOTH BALER ENGAGEMENT

Exclusive SmartShift™ gearbox features two-speed start-up technology for smooth baler engagement while protecting the tractor’s driveline.

HYDRAULIC AXLE SUSPENSION

Provides excellent ground following ability and superior accessibility underneath the baler.

STRONGER KNOTS

Patented Loop Master™ knotter system increases overall bale tensile strength up to 26% for lower operating costs while eliminating twine offcuts.

Specifications

Model

BigBaler High Density Large Square Balers

Category Name

Equipment

Sale Type

New

Manufacturer

New Holland

Quantity

0

Manufacturer Qty

0

Gallery

New Holland BigBaler High Density Large Square Balers BigBaler 340 High Density

cropcutter® feeding system

BENEFITS OF SHORTER PARTICLE LENGTH Cutting crop as it’s fed into the baler delivers shorter particle lengths, which results in tighter material packing and greater bale density. Cutting material with up to 29 spring-protected knives can help improve silage bale fermentation, feed digestibility, bale breakup and mixing, and material absorbency. Added density can also mean more weight per bale and more tons per truck, providing even greater savings.
KNIFE DRAWER Sharp knives require less power and lead to a more consistent cut length. The one-piece, slide-out knife drawer makes knife inspection and sharpening fast and easy. Knives are hydraulically activated from the cab. When cutting is not desired, the knife slots are easy to keep clean by using the supplied blanking plates that are conveniently stowed.
DIRECT PRECOMPRESSION CHAMBER FEEDING The high-performance CropCutter® rotor cutting and feeding system moves material directly into the pre-compression chamber. When the desired pre-chamber density is achieved, the stuffer starts and swiftly moves the perfect flake into position. In the most difficult baling conditions, the rotor floor can hydraulically drop away to release the crop pressure for even easier restarting.

packer feeding system

RELIABLE PACKER FEEDING

The high-capacity packer model features three, three-tine packer forks made of Hardox®-brand steel that deliver performance, durability, and wear resistance. To match the baler's high throughput, the packer driveline is upgraded to handle up to 25% more power than BigBaler PLUS models.

INDUSTRY-LEADING PRECOMPRESSION TECHNOLOGY

The packer feeder, precompression chamber and stuffer system provide unmatched reliability and consistent bale formation. Holding fingers retain crop until the desired density is achieved, and then paddles at the bottom of the chamber trip to start the stuffer motion. The heavy-duty shuttle feeder swiftly moves even the heaviest crop into the chamber, resulting in filled corners for perfectly square bales.

frame ＆ axles

HEAVY-DUTY FRAME A new, even more robust frame has been designed to withstand higher-density loads created by the baler. The new main gearbox is mounted to the top beam to reduce crop accumulation underneath and increase durability. Additionally, the drawbar is not part of the main frame to facilitate height adjustment via the dedicated height adjustment rods, which is convenient when baling with different tractors.
EFFICIENT SUSPENSION The new hydraulic suspension system delivers improved ground following and ensures perfect weight distribution across all four wheels. On uneven terrain, when the front wheel goes up, the rear wheel goes down, which improves field-hugging performance and reduces tire wear.
AUTO-STEER TANDEM AXLES The Auto-Steer tandem axle provides efficient turning and less stubble damage. The baler’s wheelbase has also been extended to deliver a best-in-class steering angle for even tighter turns, resulting in shorter headlands, easy road transport, and improved servicing access.
LARGER TIRES Larger diameter tires, up to 59 inches tall, can be fitted to the BigBaler 340 High Density to help reduce soil compaction. Choose the standard 600/50 R22.5 tires, or upgrade to the 620/55 R26.5 tires for the lightest possible footprint. Regardless of tire choice, transport width remains less than ten-feet wide down the road.

technical specifications

Width (in. (cm))	47 (120)
Height (in. (cm))	35 (90)
Minimum / Maximum length (in. (cm))	39 / 118 (100 / 300)
Minimum PTO power (hp (kW))	220-240 (164-179)
PTO speed / type	1000 rpm / 20 spline shaft
Hydraulic remotes	Standard: 2 x double acting 1 x single acting - Optional: 2 double acting + load sensing power beyond port*
SmartShift™ two-speed powershift gearbox - Two-speed / lower torque start-up	Standard
SmartShift™ two-speed powershift gearbox - Smart brake plunger technology	Standard
SmartShift™ two-speed powershift gearbox - Overload protection	Standard
Flywheel diameter (in. (mm))	42.5 (1080)
Flywheel weight (lbs. (kg))	714 (324)
Super-duty main gearbox - Enclosed sextuple reduction gearing	Standard
Super-duty main gearbox - Twin drive gears turning the main ouput gear	Standard
Main gearbox type input speed (rpm)	1440
Width (DIN 11220) (ft. (m))	7.7 (2.35)
Roller windguard	Standard
Feed assist auger - chain driven	Standard
Feed assist auger - hydraulic driven	Optional
Number of double tines	85
Tine diameter (in. (mm))	0.2 (5.5)
Flotation	Adjustable spring
Removable gauge wheels	Standard
Removable castering gauge wheels	Optional
HD 15x6.00-6 gauge wheel tires	Standard
Pick up slipclutch protection	Standard
Feeder	3 packer forks / 9 single tines
Feed assist auger	Standard
Number of knives	–
Theoretical cut length (in. (mm))	–
Full access, slide-out knife drawer	–
Knife activation, in - out	–
Knife blanking plates & storage	–
Hydraulic drop-floor slug release	–
Spring-loaded knife protection	–
Hard-faced rotor	–
Rotor protection	–
SmartFill™ II system	Standard
Stuffer activation	Automatic charge sensing
Stuffer mechanism	Fork with 6 tines
Stuffer drive	Oil-bath gearbox
Stuffer speed	up to 48 cycles per minute
Stuffer protection	Shear bolt (M10x90)
Speed Strokes / min	48
Length of stroke (in. (mm))	29 (748)
Loop Master™ double knot type	Standard
Twine type	100-130 m/kg grade
Number of twines	6
Knotter fan type	Electric
Number of knotter fans	3
Knotter engagement system	Electronic
Knotter function alert	Monitor and knotter flags
Knotter lubrication	Grease / Autolube
Twine ball capacity	36 XL
Hydraulic foldable twine boxes	Standard
Operation	Manual or automatic density
Number of cylinders	7 double acting cylinders
Hydraulic system type	Proportional controlled
ISOBUS Class III with AEF Certification	Standard
ISOBUS compatible for Virtual Terminal - less display	Standard
IntelliView™ IV color touchscreen display	Optional
ISOBUS III IntelliCruise™ System	Optional
ActiveWeigh™ Bale Weight System	Optional
Moisture sensing - rub pad	Optional
Moisture sensing - star wheel	Optional
PLM GPS data logging	Optional
CropSaver™ Crop Preservative Applicator	Optional
Camera monitoring system	Optional
Front & rear road & signal lights	Standard
1 x Rotary beacon	Optional
2 x Rear work lights	Standard
LED Strip needle light	Standard
LED Strip pickup light	Standard
LED Strip knotter lights	Standard
LH/RH - LED twine box lights	Optional
LH/RH - LED stuffer lights	Optional