New Holland Compact Wheel Loaders W50C ZB

Overview

CAB HEIGHT IN (MM)

97” (2458)

WHEELBASE IN (MM)

82” (2075)

COMFORT AND PERFORMANCE

Both W50C and W80C are here to provide comfort at work and let you reduce downtime. A spacious cab incorporates a standard LCD display and natural, ergonomic controls.

HIGH VERSATILITY

The choice of one or two auxiliary hydraulic circuits and the availability of high flow in combination with creep speed allows work to be done at max flow at a constantly low forward pace.

SUPERIOR PERFORMANCE

The weight distribution enables the new compact wheel loader to fully benefit from its impressive improved lifting capacity.

HIGH PRECISION

The inch and brake pedal progressively disengages the transmission in the decelerating phase while progressively engaging the brakes, giving the operator millimetric control of the machine at low speeds.

Specifications

Model

Compact Wheel Loaders

Category Name

Equipment

Sale Type

New

Manufacturer

New Holland

Quantity

0

Manufacturer Qty

0

Gallery

New Holland Compact Wheel Loaders W50C ZB

engine

CLEAN, POWERFUL ENGINES

Step up into the superb BRAUD 9090X Olive cab. You will find it has been designed to fit you perfectly. The cab is fully suspended and sound-proofed for a smoother, more comfortable drive. Pressurized, heated and air-conditioned, the cabs are designed to offer optimum comfort and protection during harvest, spraying and other operations. Noise levels have been reduced by 3 dBA compared to the previous harvesters when compared in like conditions. A seat belt, safety glass breaking hammer and electronic operator presence sensor are standard fittings. A fire extinguisher is available.The entire range boasts 3.4 liter Common Rail F5H engines developed by FPT Industrial that comply with the stringent Stage V emissions regulations. Advanced Common Rail technology delivers precise fuelling for optimal response and has also reduced fuel consumption significantly compared to previous models. This super-quiet engine develops up to 75 hp and up to 314 Nm of torque for guaranteed productivity and operator comfort. The entire range uses Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) technology for Stage V compliance, which is maintenance-free and further enhances efficiency to reduce total cost of ownership.

POWERED BY FPT INDUSTRIAL

New Holland is not alone when it comes to Stage V technology, they can draw on the experience of their in-house engine development specialist: FPT Industrial.

Pioneers: Common Rail technology, developed by FPT Industrial at their R&D excellence center in Arbon, Switzerland in the 1980s and brought to the masses in 1997 on the Alfa Romeo 156. They were the very first to introduce it on agricultural machines on the TS-A tractor. Pioneering. Always.
Cleaner: For the ninth consecutive year, CNH Industrial has topped the Dow Jones Sustainability World and Europe Indexes for the Industrial Engineering sector. Cleaner. Everywhere.
Proven: FPT Industrial has already produced over 345,000 F5C engines since its launch in 2007. Reliability. Confirmed.

DOC & DPF : INTEGRATED EMISSION TECHNOLOGY

DOC & DPF technology is used to meet Stage V emissions regulations
Diesel Oxidation Catalyst converts pollutants present in the exhaust stream to harmless substances such as carbon dioxide and water
DPF: Diesel particulate filter removes particulate matter from the exhaust gases
Maintenance-free after-treatment system
No need for AdBlue

COMMON RAIL. COMMON SENSE.

Your compact wheel loader receives precisely the amount of fuel it requires, maximum power is produced at 2500rpm
The optimized combustion process results in more efficient engines which are better able to respond to your demands

LONG SERVICE INTERVALS

Service intervals have been further extended to an industry-leading 500 hours
Saving both time and money

Reducing fuel consumption

With the use of Common Rail, DOC and DPF technology across the range, fuel consumption has been reduced significantly
Precision fueling is key to fuel efficiency

cab and comfort

SUPERIOR COMFORT AND SAFETY.

Almost unobstructed 360-degree vision is offered by the newly designed cab. The elevated driving position and an abundance of curved glass within four narrow pillars ensure the best view of any materials handler on the market. Access via the wide-opening glass door is easy and straightforward, operators will appreciate the bright airy space and fully opening side window and low noise levels of 71dB(A). Further comforts include 10 air vents, air conditioning, air suspended seat, tilting and telescopic steering column and many useful storage compartments.

DESIGNED TO SAVE TIME

• The cab has been lowered to increase accessibility to low buildings
• Useful features include the fully opening door and side window, which can be locked open

DELUXE CAB FOR DEMANDING OPERATORS

• Easy entry is guaranteed courtesy of the low cab floor and wide steps
• The Deluxe option includes additional storage compartments and steering wheel height adjustment

SUPERIOR CAB SAFETY

The cab comes standard with ROPS and FOPS Level 2 protection guaranteeing your safety at work

technical specifications

Cab height in (mm)	97” (2458)
Wheelbase in (mm)	82” (2075)
Ground clearance under shaft in (mm)	17” (444)
Ground clearance under axles in (mm)	13” (321)
Angle of departure in (mm)	28°
Overall width without bucket in (mm)	69” (1740)
Tread width in (mm)	55” (1400)
Operating height - fully raised with spillguard in (mm)	154” (1400)
Hinge pin height - fully raised in (mm)	122” (3136)
Overall length - bucket level on ground in (mm)	206” (5283)
Dump height - fully raised, 45° dump in (mm)	97” (2490)
Bucket reach - fully raised, 45° dump in (mm)	30” (766)
Bucket reach - 7 ft 0 (2.13m), 45° dump in (mm)	43” (1102)
Dig Depth in (mm)	3” (73)
Turning radius: outside in (mm)	146” (3721)
Turning angle: Total angle degrees	80
Turning angle: From center degrees	40
Turning angle: Rear axle oscillation, total degrees	18
Voltage volts	12
Alternator amps	120
Batteries	95 AHR, 900 CCA
Pump (steering/implement)	Open-centered pressure/flow compensated. Fixed gear pump
Loader control valve	Open-center, Hydraulic Loader Control with single lever includes: Forward/Neutral/Reverse switch, Floating switch, Low/High Travel mode switch, Auxiliary Function Roller
Loader auxiliary steering	Hydraulic orbital center-pivot articulating w/on-demand oil flow
Filtration	15-micron, full flow replaceable cartridges on return line
Flow at 2500 rpm gpm (lpm)	18 (67)
Main relief pressure psi (bar)	3335 (230)
Pump	Additional HF pump
Flow at 2500 rpm gpm (lpm)	NA
Pressure psi (bar)	NA
Lift cylinder(s)	two
Bore diameter in (mm)	3 (70)
Rod diameter in (mm)	2 (51)
Stroke in (mm)	29 (728)
Dump cylinder: Bore diameter in (mm)	3 (83)
Dump cylinder: Rod diameter in (mm)	2 (44)
Dump cylinder: Stroke in (mm)	19 (492)
Model	F5HFL463B*F001
Type	4-stroke
Cylinders	4 cylinders
Fuel injection	High pressure common rail injection
Fuel	Diesel
Fuel Filter	Replaceable, full flow
Air filter	Dry type element w/ warning restriction indicator
Radiator Core type	Staggered
Fan	Direct drive
Lubrication/cooling oil pump	Integral
Engine oil	SAE 10W40 CJ-4 Diesel SAE 0W40 CJ-4 Diesel
Pump	Deep sump plate cooler with pressurized under-piston nozzles
Bore in. (mm)	3.898 (99)
Stroke in. (mm)	4.33 (110)
Displacement liters	3.4
Pump operating angles: Side-to-side degrees	Rated 35
Pump operating angles: Fore and aft degrees	Rated 35
Pump operating angles: Oil filtration	Replaceable, full flow
Engine speed: Rated speed, full load rpm	2500
Engine speed: Low idle rpm	950
Engine speed: High idle, no load rpm	2500
Horsepower @ 2500 rpm Gross hp (kW)	58 (43)
Horsepower @ 2500 rpm Net hp (kW)	55 (41)
Peak torque @ 1400 rpm Gross lb. ft. (N·m)	181 (245)
Peak torque @ 1400 rpm Net lb. ft. (N·m)	185 (251)
Transmission	Hydrostatic transmission
Planetaries	Outboard
Pump relief psi (kPa)	6 (42)
Pump flow @ 2500 rpm gpm (L/min)	26 (100)
Differential	Open or LSD
Differential ratio	3.67
Planetary ratio	6
Final axle ratio	22
1st ratio	1.85
2nd ratio	NA
Service brakes	Single pedal. Not assisted, Hydraulic Brake pump with control of the “Inching” function. Auto refill system with auxiliary fluid tank. Caliper on front axle
Parking brake	Mechanical control lever, Single dry disk on input of the front axle, Mechanical Caliper with no auto wear adjustment
Turtle - Forward mph (km/h)	3 (5)
Turtle - Reverse mph (km/h)	3 (5)
Rabbit - Forward mph (km/h)	12 (20)
Rabbit - Reverse mph (km/h)	12 (20)
High speed - Turtle - Forward mph (km/h)	NA
High speed - Turtle - Reverse mph (km/h)	NA
High speed - Rabbit - Forward mph (km/h)	NA
High speed - Rabbit - Reverse mph (km/h)	NA
Fuel tank gal. (l)	23 (87)
Total gal. (l)	15 (57)
Reservoir gal. (l)	11 (40)
Front Axle gal. (l)	2 (9)
Rear Axle gal. (l)	3 (12)
Engine oil w/ filter gal. (l)	2 (7)
Cooling gal. (l)	3 (13)
Reference configuration	Unit Equipped with ROPS/FOPS cab with heater, standard counterweight, front and rear fenders, full fuel, 165 (75 kg) operator
Reference tires	12.5-18 PRMPT Dunlop Tires 12.5-18 PRMPT Dunlop Tires
Reference bucket	0.9 yd³ (0.7 m³) general purpose bucket w/ Bolt-on-Edge
Operating weights lb. (kg)	11,111 (5040)
With optional counterweight lb. (kg)	NA
Fork weight with V type Coupler lb. (kg)	772 (350)
Forks length in. (mm)	47 (1200)
Fork load center in. (mm)	20 (500)
Max height below forks in. (mm)	114 (2903)
Ground-Fork Clearance @ max Reach in. (mm)	50 (1266)
Payload (80% of FTTL - EN 474-3) lb. (kg)	4004 (1816)
Tipping load - straight lb. (kg)	6019 (2730)
Tipping load - 40° turn lb. (kg)	5004 (2270)
Payload (80% of FTTL - EN 474-3) w/ add cwt lb. (kg)	NA
Tipping load with add cwt- straight lb. (kg)	NA
Tipping load with add cwt - 40° turn lb. (kg)	NA
Dump angle - fully raised degrees	45
Max. rollback: Ground degrees	39
Max. rollback: Carry Position degrees	47
Max. rollback: @ Maximum reach degrees	69
Max. rollback: @ Full height degrees	73
Maximum back dragging angle degrees	42
ISO bucket capacity - Struck yd3 (m3)	0.7 (0.5)
Heaped yd3 (m3)	1.0 (0.7)
Bucket width - outside in. (mm)	74 (1900)
Bucket weight (incl. Coupler and components) lb. (kg)	805 (365)
Operating load - ISO lb. (kg)	3538 (1605)
Maximum material density - ISO lb/yd³ (kg/m3)	3865 (2293)
Tipping load - ISO: Straight lb. (kg)	8534 (3871)
Tipping load - ISO: 40° turn lb. (kg)	7077 (3210)
Tipping load - ISO: Straight with add cwt	NA
Tipping load - ISO: 40° turn with add cwt	NA
Operating load with add cwt - ISO	NA
Maximum material density with add cwt - ISO	NA
Lift Capacity: Full height lb. (kg)	7227 (3278)
Lift Capacity: Maximum reach lb. (kg)	9200 (4173)
Lift Capacity: Ground lb. (kg)	11,669 (5293)
Breakout force with tilt cylinder lbf. (kgF)	13,356 (6058)
Loader clearance circle in. (mm)	335 (8596)