Kuhn 5805 Offset 20R

Overview

Heavy Crop Residue Management

Recognized for rugged dependability and heavy-duty construction, this machine is prepared for your toughest tillage challenges. Working widths range from 12’3” to 21’3”.

If your farming operation calls for a heavy-duty, offset disc harrow, there’s no better choice than the KUHN Krause 5805 offset disc harrow. KUHN Krause offsets are renowned for their rugged dependability and heavy-duty construction. Choose from rock-flex or rigid bearing arms pending on the soil conditions you have on your farm.

Specifications

Model

5805 Offset

Category Name

Agriculture

Sale Type

New

Manufacturer

Kuhn

Quantity

0

Manufacturer Qty

0

Model

5805-20R

Weight

12,532 lb (5 684 kg)

Frame Type

Rigid

Working Width

20'2" (6.1 m)

Disc Gang Angle

Adjustable Gang Angle 16 to 25 Degrees

Transport Width

21'3" (6.5 m)

Disc Blade Spacing

10" Front, 10" Rear (25.4 cm)

Number Of Disc Blades

51

Number Of Bearing Arms

14

Gallery

your benefits

The Strength is in the Gang

Kuhn 5805 Offset 20R Gang Design

5805 offset disc harrow gangs feature 26” or 28” diameter blades mounted on Rock-Flex or rigid bearing arms and feature PEER® TILLXTREME™ maintenance-free bearings. Gang angles are pin-stop adjustable from 16 to 25 degrees. A ratchet-jack, located on the rear gang, allows side-to-side gang adjustment to fine-tune performance. Front and rear gangs feature tapered blades to provide a level pass-to-pass finish. Bolt-on extension spool and furrow filler blades are standard equipment on 5805 discs, so inadvertently hitting an obstacle doesn’t damage the entire gang.

Kuhn 5805 Offset 20R Spools

KUHN Krause heavy-cast spools multiply the strength of the disc gang. Spools are line-bored for an exact fit on the tie rod and precision faced to perfectly match the blade surface. A larger bell on the concave end and a smaller bell on the convex end provide an overlap fit against the blades, supporting the blade more positively without creating a stress line.

Kuhn 5805 Offset 20R Residue Razor™ Disc Blades

All KUHN Krause tandem disc harrows feature Residue Razor disc blades that are engineered with a unique Boron steel optimizing strength to withstand stress, fractures, and to provide flexibility in rock conditions. Residue Razor discs have an exceptionally sharp edge, five times sharper than conventional blades.

Kuhn 5805 Offset 20R Rugged Scrapers

The 6 ½”, paddle-type, flat-blade scrapers are mounted individually on a scraper bar. The scrapers and bar may be adjusted for varying soil conditions.

Heavy-Duty Frame

Kuhn 5805 Offset 20R Frame Design

Massive main frame beams are 6’ x 8’ x 3/8” structural steel with gang beams of 4” x 10” material, providing ultimate strength and rigidity.

The massive tongue features a handy “wrenchless” adjustment with seven different settings, making it easy for the operator to set the 5805 for the correct draft. The rocker shaft design utilizes hydraulic cylinders that act directly on each wheel arm, reducing frame stress and torsion.

Greater Load Capacity

Kuhn 5805 Offset 20R Metric Tires