Scag SFC-30

SFC-30 FINISH CUT WALK-BEHIND Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home. ...

Overview

SFC-30

FINISH CUT WALK-BEHIND

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Specifications

Model
SFC-30
Category Name
Lawn Care
Sale Type
New
Manufacturer
Scag
Quantity
0
Manufacturer Qty
0
Tracking Width
28.75"
Height - Max Operating
45.25"
Height - Lowest Operating
36.75"
Operating Weight - Bagging
220 lbs.
Width (w/ Discharge Chute)
36.75"
Operating Weight - Mulching
214 lbs.
Operating Weight - Discharging
213 lbs.
Width (w/ Discharge Block Off Plate)
31.5"
Height - W/ Handle Bar In Storage Position
57.5"
Length - Max (handles In Lowest Operating Position)
73.5"
Length - Minimum (handles In Highest Operating Position)
66"
Length - Transport (handles In Upright Transport Position)
41"

features

Scag SFC 30 MOW WITH EASE

 Front Swivel Caster Wheels

Front swivel caster wheel model offers increased ease of manueverability in highly landscaped areas. Swivel wheel accessory also available to convert fixed wheel models.

Scag SFC 30 FULLY FABRICATED AND WELDED STEEL CUTTER DECK

Military-Grade Steel - Deck

Extra-strong fabricated (non-stamped) steel cutter deck features 14-gauge, grade 100 Military-Grade steel deck shell, 12-gauge spindle reinforcement plate and ¼” side reinforcement bar, all while delivering the quality-of-cut you’d expect from a Scag mower.

Scag SFC 30 FULLY FABRICATED AND WELDED STEEL FRAME

Military-Grade Steel - Frame

Extra-strong, fully fabricated steel frame (not cast aluminum). The Military-Grade steel spec used on the SFC30 is over 200% stronger than standard drawing steel found in common stamped frames and decks in this machine class.

Scag SFC 30 SINGLE POINT HEIGHT-OF-CUT ADJUSTMENT

Fine-Tuned and Simple

Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.

Scag SFC 30 OFFSET BLADE SET UP

Simplified Deck Drive System

An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.

Scag SFC 30 SCAG LEVEL QUALITY-OF-CUT

Unmatched Performance

The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.

  Scag SFC 30 OPERATOR CONTROL PANEL

Ergonomic Controls

Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

Scag SFC 30 OVERSIZED ADJUSTABLE CONTROLS

Achieve Maximum Comfort

Oversized handles feature internally routed cables to protect from potential snags. Handle features tool-free adjustment, up and down, to fit operator height preference. Additional vertical adjustment setting for transportation or storage.

Scag SFC 30 DISCHARGE – MULCH – BAG

3-in-1 versatility

The SFC30 delivers the ability to discharge, mulch or bag. All options come as standard equipment, allowing the operator to change on the fly as needed. Discharge: discharge chute – Mulch: deck plug and mulch plate – Bag: bagging baffle, mulch plate and fabric bag

Scag SFC 30 POWERFUL TRANSMISSION & ENGINE COMBO

Maximum power for tough cuts

The combination of a GT MV702 best-in-class transmission and Kohler CV224 engine bring the power for optimum performance in the toughest of cutting conditions.

engine and deck combinations

Model Description
SFC30-7CV 30" fully fabricated steel cutter deck, – recoil-start engine
SFC30-7CV-CA 30" fully fabricated steel cutter deck, – recoil-start engine (California)
SFC30-7CV-S 30" fully fabricated steel cutter deck, – recoil-start engine, Swivel Front Caster
SFC30-7CV-S-CA 30" fully fabricated steel cutter deck, – recoil-start engine, Swivel Front Caster (California)

general

Rear_Tires
10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
Front_Tires
9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
Total_Fuel_Capacity
1 gallon (0.37 gallon capacity for California models)

drive system

Parking_Brake
Hand lever
Drive_System_Type
GT MV 702 Transmission
Forward_Ground_Speed
Up to 4 mph

deck

Type
Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup.
Spindles
Aluminum housing with sealed ball bearings.
Deck_Lift
Hand lever. Single-point adjustment.
Blade_Type
Optimized for maximum performance whether discharging, mulching or bagging
Construction
14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.
Bag_Capacity
2.5 Bushels
Cutting_Height
1.5" to 5" in .25" increments.
Cutting_Widths
30"
Blade_Engagement
Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.
Discharge,_Mulch,_Bag
Standard

Videos

Location

| QUICK LINKS |