BATTEUR SIMPLE ET TASSÉ (CU. FT (M³)) 217 (6.14) HEAPED, DOUBLE BEATER (CU. FT. (M³)) 261 (7.39) | |
RÉSISTANCE ÉPROUVÉENew Holland box spreaders are known for being built to last. They have durable floors and sides made from special corrosion-resistant steel for strength load after load. | |
12-YEAR BONDED PROTECTION PLANNew Holland box spreaders come with a 12-year Bonded Protection Plan that guarantees the floor and sides for peace-of-mind and better resale value. | |
CAPACITÉ POUR VOTRE OPÉRATIONFive models, with 215 to 444 cu. ft. (6.10 to 12.57 m³) of capacity, are available to match the needs of your operation. Optional slurry sides -- a New Holland exclusive -- increase capacity by approximately 25% and reduce splash over. | |
CONTRÔLES DE VITESSE FACILESSet apron speed from your tractor seat with the standard rotary quadrant control. Adjust from neutral, slow unloading, fast unloading, and cleanout. An optional hydraulic drive on the 185 et 195 provides even more variation in spreading rates. |
CONÇU POUR LA DURABILITÉBuilding the best box spreaders in the industry means providing the rugged construction needed for reliable performance. It starts with extra steel frame members in the spreader's undercarriage for increased box strength, plus, standard heavy-duty axles with high-strength steel plates and spindles for reduced frame stress. | |
L'ACIER ROBUSTE AJOUTE DE LA FORCELe A-frame hitch made of high-strength, lightweight steel extends far back under the bed. This directs pulling forces to the axles and carries the load instead of pulling it. The brawny, formed steel frame member protects the front of the floor. For easy servicing, the box spreader's axles are a separate component from the box. | |
LONG-LASTING CORROSION-RESISTANT SIDESWith sides and endgates made of special steels, New Holland box spreaders are four times more corrosion-resistant and twice as strong as ordinary steels. These maximum-strength side sheets are designed without ribs for easy-cleaning. Optional slurry sides -- a New Holland exclusive -- increase capacity by approximately 25 percent and reduce splash over. | |
PLANCHER FLOTTANT PEU D'ENTRETIENA unique floating floor, made of 3/4-pouce x 6-inch high-density polyethylene tongue-et-groove planks, expands and contracts without putting stress on the frame or sides for less box spreader wear. The rugged floor is acid- et moule-resistant, plus it won't rot, warp, chip, crack, peel or splinter, making it extremely low maintenance. | |
FONCTIONNALITÉS PERSONNALISABLESChoose either heavy-devoir T-rod or pintle-type apron chains to match your spreading conditions. With convenient rotary quadrant control, the operator can set the apron speed from the tractor, including neutral, slow-unloading, fast-unloading or clean-out positions. An optional hydraulic drive on models 185 et 195 provides even more variable spreading rates. | |
MORE HEAVY-DUTY FEATURESLes caractéristiques supplémentaires des épandeurs de caisses New Holland comprennent: | |
INDUSTRIE-EXCLUSIVE GUARANTEEStandard with every New Holland box spreader is a special Bonded Protection guarantee on the floors and sides for twelve years. This no-hassle guarantee offers free replacement of the floor or sides if they fail within twelve years of the original dealer purchase. No one else offers this type of protection. |
Heaped, single beater (cu. ft (m³)) |
217 (6.14) |
Heaped, double beater (cu. ft. (m³)) |
261 (7.39) |
Niveau atteint (cu. ft. (m³)) |
132 (3.74) |
Struck level, slurry sides (cu. ft. (m³)) |
173 (4.90) |
Bushels - Old Rating |
210 |
Charge nette maximale (Kg. (kg)) |
10,000 (4536) |
Largeur intérieure du lit (in. (m)) |
60.9 (1.55) |
Overall width with 11.00x22.5 pneus (in. (m)) |
92.5 (2.35)** |
Inside bed depth, top of flare (in. (m)) |
22.6 (0.58) |
Longueur intérieure du lit (in. (m)) |
154.3 (3.92) |
Longueur totale (in. (m)) |
224.4 (5.70) |
Hauteur au sommet du batteur supérieur (in. (m)) |
63.8 (1.62) |
Wheel tread with 11.00x22.5 pneus (in. (m)) |
80.5 (2.05) |
Power, minimum PTO (hp (kW)) |
50 (37) |
Vitesses de prise de force (tr/min) |
540/1,000++ |
Entraînement mécanique |
2 (plus 1 lent-speed option) |
Entraînement hydraulique |
N/A |
Vite (pi/min (mpm)) |
8 (2.44) |
Lent (pi/min (mpm)) |
4.5 (1.37) |
Lent en option (pi/min (mpm)) |
2.24 (0.68) |
Hydraulique (pi/min (mpm)) |
N/A |
Nombre de palettes de batteur |
12 |
Concentrateurs uniquement (Kg. (kg)) |
1,902 (865) |
T-Canne à pêche |
Standard |
Pintle |
Optionnel |
Pintle chain, single |
D667-X Heavy Duty |
Pintle chain, double |
N/A |
Affichage du moteur d'orbite d'entraînement hydraulique. (in³/rev (cm³)) |
N/A |
Limite de débit du moteur d'orbite à entraînement hydraulique (gpm (l/min)) |
N/A |
Pression de décharge du diviseur de débit à entraînement hydraulique (psi (bar)) |
N/A |
Nom | Lien |
100 Série d'épandeurs à caisses - Brochure | Télécharger |
Spécifications techniques | Télécharger |